Description
TC-5910D RF Shield Box Key Benefits
Pair the TC5910D RF Shield Box with antenna coupler and grid fixture for perfect setup for performing radiated(OTA) testing of your DUT.
Specifications
TC-5910D Manual RF Shield Box Mechanical Specification
- RF Shield Effectiveness: >70dB, DC ~ 2.5GHz *
- Inner Dimension: 130(W) x 235(L) x 138(H) mm
- Outer Dimension: 207W) x 424(L) x 170(H) mm, lid closed. 435(H)mm, lid open
- Weight without accessories: 5 kg
- Supplied with Test Report and RF Cable, RG-400S, N(m) to N(m) 1 m, 1 pc
*Effectiveness measured with connectors: RF (2 Type-N Female, SMA Female inside), Data (DB25 and DB9, RF Filtered, 100VDC, 3A Max) Optional USB 2.0 replacing standard DB9.
Typical RF Shielding
TC-5910D Manual RF Shield Box Typical RF Shielding
The shield effectiveness below is measured when the blank panel is mounted; other I/O interface panel results a different shielding effectiveness of the shield box.
- 100 to 2000 MHz > 80 dB
- 2000 to 3000 MHz > 70 dB
- 3000 to 6000 MHz > 50 dB
***Isolation example above is based on I/O configuration as specified above. Isolation may be higher or lower based on specific I/O configuration installed.
Custom Configurations
TC Manual RF Shield Box Custom I/O Interface Panel
Customized I/O Interface panels are available. Please contact the CTS sales team for more information
*SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
- Each shielding effectiveness is measured when each I/O interface panel, which is shown above, is mounted.
- Above data was measured by Tescom, The Shielding Effectiveness might be different based on the measuring method and condition.
- This data has been measured under the condition that the cables are not connected to each filters. When the cables are connected it can affect the shielding performance.
