STE3000F2 Forensics RF Shielded Test Enclosure

Note: STE-3000F2 has standard 6 outlet 120 volt (USA) power strip – Contact CTS for pricing and availability for 230 volt power stripes for other countries.

The STE-3000F2 starts with Ramsey’s patented STE3000B enclosure with two RF isolated hands-on gloves to provide complete hands-on access to the device. Viewing of the device is provided through the RF isolated illuminated viewing window. A RF filtered 6 outlet 120 volt (USA) internal power strip is included to maintain power to the DUT throughout test and observation to prevent possible loss of data.? Additional I/O connectors may be ordered to suite your specific needs. Looking for the standard in forensic testing? We have you covered.

Request Quote Download Data Sheet

SKU: STE3000F2 Categories: , , ,


Forensics RF Shield Box STE3000F2 Key Benefits

  • Designed for lab and bench visual forensics interrogations
  • Patented design
  • RF tight hands-on access to your device
  • RF tight illuminated viewing of your device
  • 1/2″ GEN-2 high efficiency RF foam liner
  • GEN-2 high efficiency RF gaskets
  • Exclusive double lip RF seal
  • Universal removable I/O panel


Just as Ramsey led the field in RF isolation test products for pager, two way, cellular, PCS, and WLAN testing, we were right there to support the forensic industry in their requirements for data isolation and collection of wireless communications devices! Forensic investigation of cell phones, PDA’s, and other hand-held wireless devices specifically requires complete hands-on manipulation of the wireless device to identify and extract data while maintaining complete RF isolation from the outside world.

Additional information

Dimensions 10.5 × 17 × 8 in

Forensic, Manual

Internal Depth


Internal Height


Internal Width





Forensics RF Shield Box STE3000F2 Specifications

  • Connectors:
    • RF isolated 6-outlet 110 VAC power strip
    • RF isolated 6-pole feed-through terminal block
    • RF isolated USB 2.0 high speed interface
    • Additional options available
  •  Isolation:
    • >90dB @ 918MHz
    • >85dB @ 2.4GHz
    • >80dB @ 5.8GHz
  •  Dimension:
    • Outside: 12.8″H x 18″W x 12″D
    • Inside: 8″H x 17″W x 10.5″D
  • Weight: 25 lbs./11.24kg

IO Configurations

Custom Configuration Options

  • FIBER OPTIC: Fiber optic bulkhead feedthrough, ST, FC
  • DUST COVERS: Dust cover capes with security chains available for all RF feedthrough connectors
  • RF FILTERED DATA: DB9 (10pF), DB9 (100pF), DB9 (1000pF), DB15 (100pF), DB15 (1000pF), DB25 (310pF), DB25 (1000pF), DB37 (310pF), DB37 (1000pF), RJ45/DB9 Filtered, RJ11/DB9 Filtered, USB1/DB9 Filtered
  • POWER CONNECTIONS: 4-Pole filtered barrier strip feed through, 6-Pole filtered barrier strip feed through, internal surge protected power strips (110VAC, 220VAC International)
  • VENTILATION OPTIONS: Dual side mounted RF filtered vents with single filtered exhaust muffin fan, passive vent only
  • RF ABSORBENT FOAM: Standard 1/2″ thick RF absorbent foram liner provides 24dB attenuation. 3/4″ thick foam is standard on the STE3800 and available as an option to provide a flatter response
  • FIBER TRANSCEIVER: Icron Technologies USB 2.0 Fiber Transceiver System available for devices up to 480 MB/s

Note: RF Isolation specs are measured at 1M with terminated RF feedthrough coaxial connectors installed. Actual isolation & attenuation can be affected by adding additional filtered and non-filtered connectors. Check with us for specific connector specifications. STE series I/O interfaces, connectors, and options are frequently updated. Check with us for updates.

[table “” not found /]