STE3500 RF Shielded Test Enclosure

The STE-3500 is designed specifically for Wireless Communications circuit board production testing where there is a need for a large footprint for isolating oversized boards and minimal height to allow for easy device placement. All connectors are milled into a removable 304 stainless steel panel to allow for future requirements when needed.

Request Quote Download Data Sheet

SKU: STE3500 Categories: , , ,

Description

The lid on the STE-3500 RF Shielded test enclosure opens automatically using the internally mounted dual precision air pistons once the dual heavy duty latches are released. Construction meets the same standards as our popular STE3300 and incorporates the same double gasket lid to provide the highest attenuation factor at the best value. The I/O panel is located close to the bottom of the rear panel to keep the cabling as close to the device under test as possible.

RF Shield Box STE3500 Key Benefits

  • Wireless device testing
  • Perfect for 802.11a, b, g
  • Cellular, PCS, GSM 3G Testing
  • Bluetooth, RFID, ZigBee testing
  • Wide variety of I/O options
  • Super isolation up to 18GHz
  • RF radiating test fixture models for absolute repeatability testing
  • Stock models to fit your custom applications

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE

Additional information

Weight 10.43 kg
Dimensions 15.75 × 18.75 × 8.5 in
Function

Manual

Internal Depth

15-20in

Internal Height

6-10in

Internal Width

18in and greater

Manufacturer

Ramsey

Specifications

RF Shield Box STE3500 Specifications

  • RF absorbent foam liner
  • Exclusive double lip RF tight gasket
  • Universal I/O connector interface plate
  • Easy release latch system
  • Dual gas filled cover struts
  • Designed to test complete systems
  • Isolation:
    • -90dB @ 2GHz
    • -90dB @ 3GHz
    • -80dB @ 6GHz
  • Dimension:
    • Outside: 9″H x 22″W x 17″D
    • Inside: 8.5″H x 18.75″W x 15.75″D

IO Configurations

Custom Configuration Options

  • RF FEEDTHROUGH: BNC, TNC, SMA, SMB, UHF, Type-N
  • FIBER OPTIC: Fiber optic bulkhead feedthrough, ST, FC
  • DUST COVERS: Dust cover capes with security chains available for all RF feedthrough connectors
  • RF FILTERED DATA: DB9 (10pF), DB9 (100pF), DB9 (1000pF), DB15 (100pF), DB15 (1000pF), DB25 (310pF), DB25 (1000pF), DB37 (310pF), DB37 (1000pF), RJ45/DB9 Filtered, RJ11/DB9 Filtered, USB1/DB9 Filtered
  • POWER CONNECTIONS: 4-Pole filtered barrier strip feed through, 6-Pole filtered barrier strip feed through, internal surge protected power strips (110VAC, 220VAC International)
  • VENTILATION OPTIONS: Dual side mounted RF filtered vents with single filtered exhaust muffin fan, passive vent only
  • RF ABSORBENT FOAM: Standard 1/2″ thick RF absorbent foram liner provides 24dB attenuation. 3/4″ thick foam is standard on the STE3800 and available as an option to provide a flatter response
  • FIBER TRANSCEIVER: Icron Technologies USB 2.0 Fiber Transceiver System available for devices up to 480 MB/s

Note: RF Isolation specs are measured at 1M with terminated RF feedthrough coaxial connectors installed. Actual isolation & attenuation can be affected by adding additional filtered and non-filtered connectors. Check with us for specific connector specifications. STE series I/O interfaces, connectors, and options are frequently updated. Check with us for updates.

[table “” not found /]