TC-5972DPU Pneumatic RF Shield Box

TC-5972DPU RF Shield Box provides both high RF isolation up to 12GHz and room for testing medium to large size wireless device testing. TC-5972DPU Pneumatic RF Shield Box is an ideal test platform for Engineering, Manufacturing, or service due to it’s ergonomic design. The TC-5972s are available in manual or pneumatic versions. You want to choose the pneumatic version for high volume testing, such as on a manufacturing line.

Request Quote Download Data Sheet

SKU: TC-5972DPU Categories: , , Tag:

Description

TC5972DPU Pneumatic RF Shield Box

  • High RF shielding up to 12GHz
  • Easy Opening/Closing of Door
  • 4 Standard RF Ports(N-Type Outside, SMA Inside) Built-In
  • EMI filters on all Data and DC lines
  • Installs up to Two Optional I/O Plates
  • Easily Field Replaceable Rear I/O Connectors and I/O Plates
  • Proprietary Multi-layer absorber for radiation testing
  • Pneumatic control of lid open-close and optional test fixtures – Standard or Custom
  • Shock Absorbers on Door
  • Red and Green LED’s for Pass/Fail indication
  • EMI filters on all data ports and power lines
  • Remote operation by RS-232C

The TC5972DPU RF Shield Box is the smaller pneumatic version of the TC5970D RF Shield Box. It provides both high RF isolation and room for testing Small to Medium size wireless devices. TC5972DPU RF Shield Box is an ideal test platform for Engineering, Manufacturing, or service due to it’s size and ergonomic design. This RF Shield Box is built with durability and longevity for your testing now and for the future in a high volume environment as your testing requirements change as your products change. This is the last RF Shield Box you will need with all the various options for I/O plates and internal fixtures to accommodate your DUT(Device Under Test). With our proprietary multilayer RF absorber or the Ferrite absorber you will get consistent repeatable test results you can be confident of.

If you need the benefits of the pneumatically Operated TC-5972DPU RF Shield Box but in a manual open/close shield box, you may want to consider the pneumatic TC-5972DU RF Shield Box.

 

*SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE

Additional information

Weight 32 kg
Dimensions 18.5 × 18.5 × 14.2 in
Function

Pneumatic

Manufacturer

Tescom

Internal Depth

15-20in

Internal Height

10-20in

Internal Width

18in and greater

Specifications

Mechanical Specifications

  • RF Connectors without module: 4 N (f) outside and SMA (f) inside
  • Line voltage: DC 24 V, Max. 2A.
  • Remote control: RS-232C, 3 wire, DB9(s)
  • Air connection
    • Main Connector: 6 mm OD hose, one-touch push-on fitting
    • Fixture Control Connector: 4 mm OD hose, one-touch push-on fitting
    • Input Air Pressure: 5 to 10 bar
  • Dimensions
    • Inside: 470(W) x 470(D) x 360(H) mm, 230(D)mm top side
    • Outside: 580(W)×661(D) ×452(H)mm
    • Door: 420(W) x 358(H)
  • Weight: approximately 48 kg
  • Shielding effectiveness: >60dB DC~2.5GHz, >50dB 2.5~6GHz
  • Data line Capacity: 100 VDC, 3 Amps maximum
  • Inner walls lined with multi layer absorber: Inner Dimension: 445(W)×445(D) ×360(H)mm, 230(D)mm top side

Typical RF Shielding

The shield effectiveness below is measured when the blank panel is mounted; other I/O interface panel results a different shielding effectiveness of the shield box.

  • 100 to 2000 MHz > 70 dB
  • 2000 to 3000 MHz > 70 dB
  • 3000 to 6000 MHz > 50 dB

***Isolation example above is based on I/O configuration as specified above. Isolation may be higher or lower based on specific I/O configuration installed.

Custom Configurations

TC Manual RF Shield Box Custom I/O Interface Panel

Customized I/O Interface panels are available. Please contact the CTS sales team for more information

I/O InterfaceOrder NumberTypical Data Rate/Line VoltageTypical Shielding*

DB37, 1000pF pi Filter
3409-0012-13 Mbps / 100 VDC,
5 Amps max
>70 dB from 0.5 to 2 GHz
>80 dB from 2 to 3 GHz
>70 dB from 3 to 6 GHz

DB25, 1000pF pi Filter
3409-0009-13 Mbps / 100 VDC,
5 Amps max
>70 dB from 0.5 to 2 GHz
>80 dB from 2 to 3 GHz
>70 dB from 3 to 6 GHz

DB25, 100pF pi Filter
3409-0014-110 Mbps / 100 VDC,
5 Amps max
>50 dB from 0.5 to 2 GHz
>60 dB from 2 to 3 GHz
>60 dB from 3 to 6 GHz

DB9, 1000pF pi Filter
3409-0008-13 Mbps / 100 VDC,
5 Amps max
>70 dB from 0.5 to 2 GHz
>80 dB from 2 to 3 GHz
>70 dB from 3 to 6 GHz

DB9, 100pF pi Filter
3409-0010-110 Mbps / 100 VDC,
5 Amps max
>50 dB from 0.5 to 2 GHz
>60 dB from 2 to 3 GHz
>60 dB from 3 to 6 GHz

USB 2.0 Filter
3409-0018A-3480 Mbps / 5 V, 500 mA /
Max Current: 5A
>60 dB from 0.5 to 2 GHz
>70 dB from 2 to 3 GHz
>70 dB from 3 to 6 GHz

USB 3.0 Filter(Active)
3409-0042A-15000 Mbps / 5 V, 900 mA /
Max Current: 1.5 A
>70 dB from 0.5 to 2 GHz
>70 dB from 2 to 3 GHz
>55 dB from 3 to 6 GHz

RJ-45 Filter
3409-0022A1 Gbit/s Copper-Line
Ethernet (1000 BASE-T)
>60 dB from 0.5 to 2 GHz
>70 dB from 2 to 3 GHz
>70 dB from 3 to 6 GHz

DC Power Adaptor
3406-0004A50 VDC,
3 Amps max
>70 dB from 0.5 to 2 GHz
>80 dB from 2 to 3 GHz
>80 dB from 3 to 6 GHz

DC Power Adaptor,
Banana Jack Type
3406-0005A
3406-0006A
50 VDC,
10 Amps max
>70 dB from 0.5 to 2 GHz
>80 dB from 2 to 3 GHz
>80 dB from 3 to 6 GHz

AC Power Adaptor
3103-0009A250 VAC,
7 Amps max
>70 dB from 0.5 to 2 GHz
>80 dB from 2 to 3 GHz
>80 dB from 3 to 6 GHz

RF, N-SMA Connector
3408-0038>60 dB from 0.5 to 2 GHz
>70 dB from 2 to 3 GHz
>70 dB from 3 to 6 GHz

RF, SMA-SMA Connector
3408-0039>60 dB from 0.5 to 2 GHz
>70 dB from 2 to 3 GHz
>70 dB from 3 to 6 GHz

*SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE

  • Each shielding effectiveness is measured when each I/O interface panel, which is shown above, is mounted.
  • Above data was measured by Tescom, The Shielding Effectiveness might be different based on the measuring method and condition.
  • This data has been measured under the condition that the cables are not connected to each filters. When the cables are connected it can affect the shielding performance.