RF Shield Box by Concentric Technology Solutions, Inc.

 

 
STE3500 RF Shielded Test Fixture
 
STE3500 RF Shielded Test Fixture

RF Shield Box STE3500 Key Benefits

  • Wireless device testing
  • Perfect for 802.11a, b, g
  • Cellular, PCS, GSM 3G Testing
  • Bluetooth, RFID, ZigBee testing
  • Wide variety of I/O options
  • Super isolation up to 18GHz
  • RF radiating test fixture models for absolute repeatability testing
  • Stock models to fit your custom applications

RF Shield Box STE3500 Specifications

  • RF absorbent foam liner
  • Exclusive double lip RF tight gasket
  • Universal I/O connector interface plate
  • Easy release latch system
  • Dual gas filled cover struts
  • Designed to test complete systems

 

  • Isolation:
    • -90dB @ 2GHz
    • -90dB @ 3GHz
    • -80dB @ 6GHz
  •  Dimension:
    • Outside: 9"H x 22"W x 17"D
    • Inside: 8.5"H x 18.75"W x 15.75"D

 

Designed specifically for Wireless Communications circuit board production testing where there is a need for a large footprint for isolating oversized boards and minimal height to allow for easy device placement. The lid opens automatically using the internally mounted dual precision air pistons once the dual heavy duty latches are released.

Construction meets the same standards as our popular STE3300 and incorporates the same double gasketed lid to provide the highest attenuation factor at the best value. The I/O panel is located close to the bottom of the rear panel to keep the cabling as close to the device under test as possible. All connectors are milled into a removable 304 stainless steel panel to allow for future requirements when needed.

 

Download Data Sheet

Want more information? Would you like a quote? Do you need someone to contact you concerning this product? Click here for our online product request form.
Custom Configuration Options
   

RF FEEDTHROUGH:

BNC, TNC, SMA, SMB, UHF, Type-N

FIBER OPTIC:

Fiber optic bulkhead feedthrough, ST, FC

DUST COVERS :

Dust cover capes with security chains available for all RF feedthrough connectors

RF FILTERED DATA:

DB9 (10pF), DB9 (100pF), DB9 (1000pF), DB15 (100pF), DB15 (1000pF), DB25 (310pF), DB25 (1000pF), DB37 (310pF), DB37 (1000pF), RJ45/DB9 Filtered, RJ11/DB9 Filtered, USB1/DB9 Filtered

POWER CONNECTIONS:

4-Pole filtered barrier strip feed through, 6-Pole filtered barrier strip feed through, internal surge protected power strips (110VAC, 220VAC International)

VENTILATION OPTIONS:

Dual side mounted RF filtered vents with single filtered exhaust muffin fan, passive vent only

RF ABSORBENT FOAM:

Standard 1/2" thick RF absorbent foram liner provides 24dB attenuation. 3/4" thick foam is standard on the STE3800 and available as an option to provide a flatter response

FIBER TRANSCEIVER :

Icron Technologies USB 2.0 Fiber Transceiver System available for devices up to 480 MB/s

Note: RF Isolation specs are measured at 1M with terminated RF feedthrough coaxial connectors installed. Actual isolation & attenuation can be affected by adding additional filtered and non-filtered connectors. Check with us for specific connector specifications.
STE series I/O interfaces, connectors, and options are frequently updated. Check with us for updates.